When spinning wheels on the line, the fishing line should be folded in half. After folding, the end of the fishing line should be bent back to form a coil. The bent end of the fishing line should go through the formed coil and entangle the two fishing lines folded for the first time for 3-4 turns.

After winding, tighten the ends of the wrapped knots, cut off the redundant wires with scissors, and bind them into a looper coil. Some knots of the looper coil are also very firm.

After the spinning wheel cup is opened, the tied looper is put on the cup, the fishing line is tightened, the looper is tightly tied on the spinning wheel cup, and the cup holder is closed.

Prepare a wet rag to wrap the line at one end and start the line at the other side. It's better for two people to go online together when going online, so as to avoid the phenomenon of line explosion because the line is not tight. The wet rag can also prevent the damage and strength reduction caused by the friction heat of the fishing line.

The axis of the bobbin is perpendicular to the ground. When loading, it should follow the opposite direction of the bobbin winding to release the inherent strength of the fishing line, so as to avoid the curling and winding of the line due to the special winding angle of the spinning wheel.

Whether it's sea pole throwing fishing, or Lua fishing, floating rock fishing, fly fishing, all need to use the fishing line wheel, so the online steps are more important.